Simpliphi PHI 3.8-M Battery 24V or 48V Models

$2,706.00

-

Manufacturer Rebates are available. Click here for rebate information

Description

SimpliPhi Power’s PHI 3.8-MTM Battery utilizes the safest Lithium Ion chemistry available, Lithium Ferro Phosphate (LFP). No cobalt or explosive hazards that put customers at risk. By eliminating cobalt, the risk of thermal runaway, fire propagation, operating temperature constraints, and toxic coolants are reduced. When combined with our integrated high-performance Battery Management System (BMS), accessible 80A DC breaker On/Off switch and over-current protection (OCPD), the PHI 3.8-M Battery delivers safe, highly efficient and cost-effective service over the life of both residential and commercial installations, on or off-grid. Compatible with all industry-standard inverter charge controllers, the PHI 3.8-M Battery supports balance-of-system equipment and optimizes any power generation source – solar, wind, grid, generator – with scalable, on-demand energy storage solutions for critical back-up and daily savings on electricity bills.

 

 

PHI 3.8-M™24V48V
DC Voltages – Nominal25.6VDC51.2VDC
Amp-Hours151 Ah75 Ah
Rated kWh Capacity @ C/23.8 kWh DC @ 100% DOD
3.04 kWh DC @ 80% DOD
3.8 kWh DC @ 100% DOD3.04 kWh DC @ 80% DOD
MAX Discharge Rate (10 minutes)80 Amps DC (2.05 kW DC)80 Amps DC (4.1 kW DC)
MAX Continuous Discharge Rate75 Amps DC (1.9 kW DC)37.5 Amps DC (1.92 kW DC)
MAX Continuous Charge Rate75 Amps DC (1.9 kW DC)37.5 Amps DC (1.92 kW DC)
DC Voltage Range24 VDC to 28 VDC48 VDC to 56 VDC
Depth of Dischargeup to 100%up to 100%
Operating Efficiency98%98%
Charge Temperature32° to 120°F32° to 120°F
Operating Temperature-4° to 140°F-4° to 140°F
Storage Temperature6 months: 14° to 77° F
3 months: -4° to 113° F
6 months: 14° to 77° F
3 months: -4° to 113° F
Self-Discharge Rate<1% loss per month<1% loss per month
Cycle Life10,000+ (@80% DOD)10,000+ (@80% DOD)
Memory EffectNoneNone
Warranty Period10 Years10 Years
Weight86 lbs.86 lbs.
Dimensions13.5 x 14 x 8 in. (15.5” H w/terminals)13.5 x 14 x 8 in. (15.5” H w/terminals)
Model NumberPHI3.8 24V 60 VTE BRKPHI3.8 48V 60 VTE BRK

Max operating conditions. Refer to Installation Manual for recommended conditions.

  • All specifications listed are typical/nominal and subject to change without notice.
  • UN 3480, Lithium Ion battery contained in equipment, 9, II
  • UL, CE, UN/DOT and RoHS compliant components – UL Certified
  • Designed and manufactured in California, USA

 

Simpliphi battery warranty registration can be found HERE. If you do not register the battery, the warranty will not be valid. Please email or give us a call at 866-419-2616 so that we can properly determine the minimum kWh capacity you need for your battery bank. If a problem arises, and SimpliPhi determines that your battery bank was undersized for your system, the warranty will be void and will not be honored. This can be easily avoided by allowing Inverters R US to properly size the battery bank for you.

 

Calculator

Need help sizing your battery bank? Check out the Simpliphi estimator!

Additional information

Weight89 lbs
Dimensions24 × 24 × 16 in
Select a PHI Model

24V PHI-3.8-24-M, 48V PHI-3.8-48-M