Magnum Energy 2500 Watt 12V Inverter Charger ME2512

-10%

Magnum Energy 2500 Watt 12V Inverter Charger ME2512

$1,155.00 $1,040.78

  • Description
  • Additional information

Description

Introducing the ME Series Inverter/Charger from Magnum Energy — A new generation inverter designed specifically for rugged recreational vehicle use. The ME Series is powerful, easy-to-use, and best of all, cost effective. The ME series is ETL Listed to the stringent requirements of UL/cUL 458, ensuring that the inverter is safe and reliable.

Install the ME series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

 

Part Number: ME2512

 

Inverter Specifications:

  • Input battery voltage range: 9 – 16 VDC
  • Nominal AC output voltage: 120 VAC
  • Output frequency and accuracy: 60 Hz ± 0.005%
  • 1 msec surge current (amps AC): 100
  • 100 msec surge current (amps AC): 45
  • 5 sec surge power (real watts): 5000
  • 30 sec surge power (real watts): 4500
  • 5 min surge power (real watts): 3500
  • 30 min surge power (real watts): 2900
  • Continuous power output at 45° C: 2500 VA
  • Rated input battery current: 239.1 ADC
  • Inverter efficiency (peak): 91%
  • Transfer time: 16 msecs
  • Search mode: .2 ADC
  • No load (120 VAC output): 0.95 ADC
  • Waveform: Modified Sine Wave

 

Charger Specifications:

  • Charge Rate: 0-100A
  • Continuous output at 45° C: 120 ADC
  • Charger efficiency: 85%
  • Power factor: > .95
  • Input current at rated output: (AC amps) 18

 

General Features and Capabilities:

  • Transfer relay capability: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
  • Five stage charging capability: Bulk, Absorb, Float, Equalize, and Battery Saver
  • Battery temperature compensation: With available temp sensor (battery temp 0 – 50° C)
  • Remote inverter on/off switch: With available pigtail to connect to dry contact
  • Internal cooling: 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
  • Overcurrent protection: Yes, with two overlapping circuits
  • Overtemperature protection: Yes on transformer, MOSFETS, and battery
  • Conformal coating on PCB’s for corrosion protection: Yes
  • Powder coated chassis & top for corrosion protection: Yes
  • Stainless steel fasteners for corrosion protection: Yes
  • Dual AC branch rated output breakers: Optional on the ME2012 – AC breakers in 15 or 20 amp ratings
  • Series stacking interface 120/240 V: Yes
  • Listings: ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01
  • Warranty: Three (3) years

 

Physical Specifications:

  • Dimensions (h x w x d): 13.75” x 12.65” x 8.0”
  • Mounting: Shelf (top or bottom up) or bulkhead (vents up)
  • Weight: 42 lb (19 kg)
  • Max operating altitude: 15,000’ (4570 m)

 

Additional information

Weight 42 lbs
Warranty

3 Year