BLUETTI EP900 + B500 Home Battery Backup System

Price range: $3,999.00 through $17,298.00

SKU: N/A Category: Uncategorized Tag: NFB

Description
Downloads
Additional information

Description

Experience True Energy Independence

Harness and store solar power for on-demand use. Whether you want to avoid high energy bills during peak hours, protect yourself against potential energy price hikes, or prepare for a power outage when utility power is unavailable, you can rely on the EP900 & B500 Energy Storage System to keep your essential appliances running smoothly. Moreover, you can sell any excess energy back to the grid, making your energy consumption more efficient and cost-effective.

Energy Storage System Image

Design A System That’s Right For You

With an impressive 10-20kWh capacity, up to 9,000W of power, and the capability to run both 120V and 240V devices, the EP900 can accommodate your daily needs effortlessly.

Design Image

Superpower For Heavy-duty Work

The EP900 has a 9kW inverter that provides either 120V or 240V output options, making it suitable for high-wattage appliances – like power tools in small business and residential scenarios. Combine two EP900 units in parallel to reach as much as 18kW output, enough to power the whole house without any fuss.

Power Tools Image

100% Modular Design, More Possibilities

Modularity is how flexible it is to customize your battery to meet changes in your home’s energy requirements. EP900 allows you to incrementally increase your battery capacity of up to 19.8kWh (39.6kWh for two EP900s) as your home’s energy needs grow over time.

EP900 Specifications:

GENERAL

Scalability: With 2~4 B500’s (From 9.9KWh~19.8KWh)
App Control: BLUETTI APP via WiFi or Bluetooth
Warranty: 10 Years
Protection Grade: IP65
Noise: ≤50 dB (A)
Working Temperature: -4℉~122℉ / -20℃~50℃
Relative Humidity: 5%~95%

AC (Grid-Tied)

Output Power (240V): 9kW
Wiring: L1 / L2 / N / G
Voltage: 120VAC / 240VAC
Output Current: 37.5A × 2
Input Frequency: 60Hz
On and Off-grid Switching Time: <10ms
Protection:
Anti-islanding Protection
Output Overcurrent Protection
Short-circuit Protection
Over-temperature Derating
Over-temperature Shutdown
Note: The PV system is installed on the battery side and has no residual current detection.

AC (Off-Grid)

Output Power (240V): 9kW Note: 7.6kW with 2 B500
Output Voltage: 120VAC / 240VAC
Output Current: 37.5A × 2
Input Frequency: 60Hz
Protection:
Output Overcurrent Protection
Output Short-circuit Protection
Over Temperature Protection

PV Input

Maximum Input Power:
9kW with 4 B500
7.5kW with 3 B500
5kW with 2 B500
MPPT Channels:
2 (3000W + 6000W)
Array In Series:
1/2 (3000W + 6000W)
Maximum Input Voltage:
550V
MPPT Voltage Range / Rated:
150V~500V / 360V
Single MPPT Maximum Input Current:
12.5A / 25A
Single MPPT Maximum short circuit current :
15A/30A
MPPT Efficiency:
99.90%
PV Inversion Efficiency:
97.0% Max.
Protection:
Reverse Polarity Protection
Insulation Resistance Detection
Arcing Detection

Certifications:

NEMA 4X, CA65, FCC, IC, UL1741, IEC62619, IEC60529, IEC60730-1, UL9540 (EP900+B500)

Packaging List

EP900 inverter: x 1
Sub Panel (Reliance): x 1
Bracket #1: x 2
Bracket #2: x 2
M5 hex nut: x 2
Plastic cover (PV): x 1
Plastic cover (AC, with label): x 1
Cord organizer: x 2
AC cable protection case: x 1
Plastic housing (PV+ Input)
Metal core (PV+ Input): x 2
Plastic housing (PV- Input)
Metal core (PV- Input): x 2
MC4 wrench: x 1
Black protection cover (BAT- Input)
(Pre-installed on EP900 inverter): x 1
Red protection cover (BAT+ Input)
(Pre-installed on EP900 inverter): x 1
M4*12 screw (8 for BAT+/- protection cover,
6 for AC cable protection case,
pre-installed on EP900 inverter): x 14
M8*12 screw (For battery power cable): x 2
M6*12 screw (For bracket, pre-installed on EP900 inverter): x 2
M5*10 screw(4 for fixing device to the bracket, 2 for PV grounding): x 6
M4*10 screw (For exterior trim): x 10
M8*60 expansion bolt: x 2
RNB8-6S OT terminal (AC): x 9
RNB3.5-5S OT terminal (PV Grounding): x 3
Red battery power cable (Positive): x 1
Black battery power cable (Negative): x 1
IoT Controller: x 1
Mounting bracket (IoT controller/Grid communication module): x 1
Grid communication module: x 1
Expansion wall plug: x 2
M3 tapping screw (KA3*25): x 2
CT signal cable (4m)x 1 DRMs+COM signal cable (4m): x 1
M20-6 PIN adapter: x 2
CT: x 2
Self-tapping screw M8*40: x 2

B500 Specifications:

GENERAL

Protection Grade: IP65
Noise: <25dB
Operating Temperature: Charging: 32℉~104℉ / 0℃~40℃
Charging: -4℉~104℉ / -20℃~40℃ (Inverter connects to the grid)
Discharging: -4℉~104℉ / -20℃~40℃
Storage Temperature: -4℉~104℉ / -20℃~40℃/ At least one charge cycle per month.
32℉~95℉/ 0℃~35℃ / At least one charge cycle every six months.
Working Humidity: 5%-95%
Working Altitude: <2000m

B500 BATTERY

Battery Type: Lithium Iron Phosphate Cells (LiFePO4)
Rated Capacity: 4960Wh
Usable Capacity: 4464Wh
Temperature Adaptive Function: Yes
Short-circuit Protection: Yes

CERTIFICATIONS:

UL9540A, UL1973, UKCA, RCM, PSE, IP65, ICES, FCC, CE, CB

PACKAGING LIST

B500 Battery Module: x 1
Bracket #1: x 2
Bracket #2: x 2
M5 hex nut: x 2
Self-tapping screw M8*40: x 2
Left cover: x 1
Right cover: x 1
M4*8 screw: x 10
M5*10 screw: x 4
Red battery expansion cable (Positive): x 1
Black battery expansion cable (Negative): x 1
Communication cable: x 1
Grounding cable: x 1
M8*60 expansion bolt: x 2
M6*12 screw (Grounding cable): x 2
Spare screws: x 1