Magnum Energy 3100 Watt 12V Inverter Charger ME3112 & ME3112-G

Description

Introducing the ME Series Inverter/Charger from Magnum Energy — A new generation inverter designed specifically for rugged recreational vehicle use. The ME Series is powerful, easy-to-use, and best of all, cost effective. The ME series is ETL Listed to the stringent requirements of UL/cUL 458, ensuring that the inverter is safe and reliable.

Install the ME series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

Part Number: ME3112

Inverter Specifications:

• Input battery voltage range: 9 – 16 VDC
• Nominal AC output voltage: 120 VAC
• Output frequency and accuracy: 60 Hz ± 0.005%
• 1 msec surge current (amps AC): 120
• 100 msec surge current (amps AC): 50
• 5 sec surge power (real watts): 6000
• 30 sec surge power (real watts): 4800
• 5 min surge power (real watts): 3950
• 30 min surge power (real watts): 3500
• Continuous power output at 45° C: 3100 VA
• Rated input battery current: 296.5 ADC
• Inverter efficiency (peak): 90%
• Transfer time: 16 msecs
• Search mode: .2 ADC
• No load (120 VAC output): 0.97 ADC
• Waveform: Modified Sine Wave

Charger Specifications:

• Charge Rate: 0-160A
• Continuous output at 45° C: 160 ADC
• Charger efficiency: 85%
• Power factor: > .95
• Input current at rated output: (AC amps) 21

General Features and Capabilities:

• Transfer relay capability: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
• Five stage charging capability: Bulk, Absorb, Float, Equalize, and Battery Saver
• Battery temperature compensation: With available temp sensor (battery temp 0 – 50° C)
• Remote inverter on/off switch: With available pigtail to connect to dry contact
• Internal cooling: 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
• Overcurrent protection: Yes, with two overlapping circuits
• Overtemperature protection: Yes on transformer, MOSFETS, and battery
• Conformal coating on PCB’s for corrosion protection: Yes
• Powder coated chassis & top for corrosion protection: Yes
• Stainless steel fasteners for corrosion protection: Yes
• Dual AC branch rated output breakers: Optional on the ME2012 – AC breakers in 15 or 20 amp ratings
• Series stacking interface 120/240 V: Yes
• Listings: ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01
• Warranty: Three (3) years

Physical Specifications:

• Dimensions (h x w x d): 13.75” x 12.65” x 8.0”
• Mounting: Shelf (top or bottom up) or bulkhead (vents up)
• Weight: 45 lb (20 kg)
• Max operating altitude: 15,000’ (4570 m)

Additional information