KISAE 60A Abso Smart Deep Cycle 12V Battery Charger AC1260


KISAE 60A Abso Smart Deep Cycle 12V Battery Charger AC1260

$499.99 $299.99


SKU: AC1260 Category:



KISAE Part Number: KISAE AC1260

The KISAE AC1260 60A charger is a three bank battery charger that is capable of charging three battery banks individually. The three battery banks must be the same battery type. For the charging mechanism, if more than one bank is connected to the charger, the charger will charge each individual bank continuously for 15 minutes and then switch to the different bank(s) and cycle until all battery banks reach float mode. Once all battery banks reach float mode, all the banks are connected in parallel through a separation diode and will be charged together. The maximum current the charger can provide during the float mode is about 1/2 the maximum current rating of the charger.



  • faster charge for your batteries
  • 3-bank battery charging
  • travel abroad and use anywhere (accepts 90 – 285 VAC input)
  • optional remote allows you to view system information anywhere
  • microprocessor controlled multistage charging algorithms: bulk, absorption, float
  • settings for gel, flooded, AGM, and LifePO4 batteries
  • battery equalization feature
  • universal input voltage (90 – 285 VAC) is compatible with generators
  • Ideal for batteries 200Ah – 400Ah



  • Output Current: 60A
  • Output Voltage Range (Charge): 14.2-15.5V
  • Output Voltage Range (Float): 13.4-13.8V
  • Output Voltage Range (Equalize – Flooded batteries only): 16V
  • DC Output Bank: Three
  • AC Input Voltage (Nominal): 120, 230, 240 VAC
  • AC Input Operating Range: 90-265 VAC
  • AC Input Frequency Range: 47-63 Hz
  • Power Consumption (Full Load): 1050W
  • Power Factor Correction: YES
  • Selectable Battery Type: Gel, AGM, Flooded, Lithium
  • Parasitic Current: < 2 mA
  • Charger Efficiency: > 82%
  • Temperature Setting: Hot, Normal, Cold (No temp sensor connected)
  • Temperature Sensor Port: Yes (For optimal battery sensor use)
  • Remote Display Port: Yes (For optimal remote display use)
  • Silent Mode: Yes (Output power derated ~50% with fan off)
  • Cooling: Force ventilation
  • Dimensions (W X L X H): 8.1 X 13.9 X 3.7″
  • Weight: 7.7 lbs



  • Reverse Battery: Yes, with user replaceable fuse
  • Over Charge: Yes, unit shutdown
  • High Temperature: Yes, unit derated and shutdown
  • Output Short Circuit: Yes, unit shutdown



  • LCD Display (with back lighting): Charging Status, Battery Voltage
  • Warning and Fault Code: Yes (E01-E09)


AC Input and DC Output Connection:

  • AC Input Connection: Hardwire or AC Input Cord
  • DC Output Connection (positive): Heavy Duty Studs (3 banks)
  • DC Output Ground Connection (negative): Single Heavy Duty Common Ground Stud


Accessories (Optional):

  • Remote Display: External remote panel to show battery status
  • Battery Temperature Sensor: Connect to battery for accurate battery temp sensing
  • PC Interface: Monitor the charger through PC

Additional information

Weight 7.7 lbs

1 Year

You've just added this product to the cart: