Victron Energy Lynx Smart BMS 1000A (M10)
$1,178.10
-
- Description
- Downloads
- Additional information
Description
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option.
The main features are:
- Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.
- Battery monitor, indicating state of charge percentage and more data.
- Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
- Bluetooth for use with our VictronConnect App, for setup and monitoring, including Instant Readout – key data of the BMS at-a-glance.
- Local and remote monitoring using a Victron GX device, for example the Cerbo GX, Cerbo GX MK2, or Ekrano GX.
The Lynx Smart BMS is part of the modular Lynx Distribution system.
TECHNICAL SPECIFICATIONS
POWER
Battery voltage range: 9 – 60 VDC
Maximum input voltage: 75 VDC
Supported system voltages: 12, 24 or 48 V
Reverse polarity protection: No
Main safety contactor continuous current rating: 1000 A continuous
Main safety contactor peak current rating: 1200 A for 5 minutes
Power consumption OFF mode: 0.3 mA for all system voltages
Power consumption in Standby mode: Approximately 0.6 W (50 mA at 12 V)
Power consumption in ON mode: Approximately 4.2 W (350 mA at 12 V) depending on the state of the relays
Minimum load resistance for pre-charging: 10 Ω and above for 12 V systems | 20 Ω and above for 24 V and 48 V systems
AUX output maximum current rating: 1.1 A continuous, protected by resettable fuse
Allow-to-charge port Maximum current rating: 0.5 A at 60 VDC, protected by resettable fuse
Allow-to-discharge port Maximum current rating: 0.5 A at 60VDC, protected by resettable fuse
Alarm relay (SPDT) Maximum current rating: 2 A at 60 VDC
CONNECTIONS
Busbar: M10 (Torque: 33 Nm) (17 Nm for units with a serial number before HQ2340XXXX)
VE.Can: RJ45
I/O: Removable multi-connector with screw terminals
Battery BTV cables: Male and female circular 3-pole connector with M8 screw ring | Up to 20 batteries can be connected in one system
Lynx Distributor fuse monitoring (up to 4 modules): RJ10 (cable ships with each Lynx Distributor)
PHYSICAL
Enclosure material: ABS
Enclosure dimensions (H x W x D): 230 x 180 x 100 mm (9.06 x 7.09 x 3.94 in)
Unit weight: 2.7 kg (5.95 lbs)
Busbar material: Tinned copper
Busbar dimensions (H x W): 8 x 30 mm (0.31 x 1.18 in)
ENVIRONMENTAL
Operating temperature range: -40 °C to +60 °C
Storage temperature range: -40 °C to +60 °C
Humidity: Max. 95 % (non-condensing)
Protection class: IP22
STANDARDS
Safety: EN-IEC 63000:2018
EMC: EN-IEC 61000-6-3:2007/A1:2011/AC:2012
QMS: NEN-EN-ISO 9001:2015
Part Number/s:
LYN034170210
Additional information
| Weight | 6.5 lbs |
|---|---|
| Dimensions | 4.33 × 11.81 × 7.48 in |
