Victron Energy Digital Multi Control 200/200A GX DMC000200010R
- Additional information
Description of the Digital Multi Control 200/200A GX panel:
The Victron Energy Digital Multi Control 200/200A GX DMC000200010R (DMC) is a remote panel designed to work with all Multis or Quattro’s systems. This includes stand alone, parallel and 2-3 phase configurations. Both VE.Bus and non VE.Bus systems are supported.
The Digital Multi Control Panel GX is the same as the previous version, but with a new design. An extra advantage of this panel is the easy mounting: the included mounting frame allows the user to mount the panel from either front or back side. Due to the mounting frame, the mounting holes will no longer be visible. The body of the GX panel is made of plastic, which makes the panel lighter and adds a modern look to the panel. Connecting the DMC to your system is a simple procedure. In most cases just connecting the DMC with a RJ45 cable is sufficient and no extra set-up handling is required.
Standard installations with VE.Bus system with 1 AC source:
Setup for such a system is easy: Just connect the DMC to the VE.Bus system and the DMC will automatically adapt to the current system. No parameters need to be changed in the DMC unless you want to limit the maximum current the operator can set. In that case you only need to adapt the “Upper shore limit for AC input 1” setting. Refer to chapter 6 in the manual for a description of how to do this.
Standard installations with VE.Bus system with 2 AC sources:
A system with more than 1 AC input can be build with normal Multis. The extended VE.Bus functionality is used for this purpose. This functionality comes available when a dongle is connected to the system. The system must then be configured with the “VE.Bus System Configurator” tool. From the DMC point of view there is no difference between a system build with Quattro’s and a system build with Multis.
With the DMC a separate shore current and generator current can be set. When used in an extended VE.Bus system one can even set up to 4 different shore currents. For VE.Bus systems, the DMC will automatically adapt the adjustable range to match with the connected system.