KISAE Abso SW 2000 Watt 12V Inverter with 100A Charger IC1220100

Description

The unit is fully automatic. When utility power is available, the unit is running in AC bypass mode. AC output is supplied from the utility. The internal AC charger is ON and will automatically top up the battery bank that is connected to the unit. When there is a power failure from the utility or an AC source is not available, the unit will run on battery power and the unit will generate sinewave AC output to maintain and operate the load continuously.

KISAE Part Number: IC1220100

Features:

• Regulated output, 2000W sinewave
• Low frequency design with high surge capability to start demanding loads.
• Low battery shutdown to prevent total battery discharge
• Silent operation
• Over temperature shutdown
• Includes system remote panel
• Approved to UL, CSA, and European regulatory standards

Inverter Specifications:

• Continuous Output Power: 2000 Watts
• Peak (surge) Output Power: 4000 Watts (5 secs)
• AC Output Voltage/Frequency: 120 VAC/60 Hz
• Peak Output Current: 40A
• Output Waveform: True Sine Wave <3% THD
• AC Connections: Split phase in/Single phase out
• Peak Efficiency: 90%
• No Load Draw: < 3A (nominal), < 1A with load sense
• Load Sense Setting:
• DC Input Voltage (Nominal): 12.5Vdc
• DC Input Operation Range: 10.5 – 15.5Vdc
• DC Input Current: 90 A
• Input Under-Voltage Warning/Shutdown: 11.2/10.5V
• Input Under-Voltage Recovery: 11.8Vdc
• Input Over-Voltage Shutdown: 15.5Vdc
• Output Power Warning/Shutdown: Warning/Error code
• Output Short Circuit Protection: Error code
• Temperature Warning/Shutdown: Warning/Error code
• Dimensions: 15.4 X 13.4 X 12.5″
• Weight: 59.4 lbs

Battery Charger Specifications:

• Charge Voltage Range: 14.2 – 15.5V
• Float Voltage Range: 13.4 – 13.8V
• Equalize Voltage: 16.0V
• Charger Current (max): 100A
• Charger Current Setting(Automatic): Charger current maximized to AC input source
• Charge Control: Bulk / Absorption / Float
• Charging Battery Type: Gel, Flooded, AGM, Lithium
• Charge Temperature Compensation: Battery temperature sensor (optional)
• AC Input Voltage/Frequency: 120 VAC/60 Hz
• AC Input Voltage Range: 85-140VAC
• Charger Efficiency: > 85%
• Dead Battery Charging: > 3VDC
• AC Input Power Factor (maximum charge): 0.98 typical

Display:

• Display Panel: External, connect through RJ11 port
• Inverter Mode: Input voltage/Current, Output Power
• Charger Mode: Charging Status, Battery Voltage
• Warning and Fault Code: YES
• LED Indicator: YES (Invert, Standby, Charging)

AC Transfer Switch Specifications:

• Transfer Time: < 20ms
• Transfer Relay: 30A
• AC Input Connection: Hardwire Heavy Duty Connector
• AC Input Source Setting: 15, 20, 30A
• AC Input and Output Port 1: 30A transfer relay, with inverter backup

Warranty:

• 1 Year

KISAE IC1220100 Owner’s Manual

KISAE IC1220100 Spec Sheet

1/0 Cables & Fuses

Additional information