-10%

Go Power Pure Sine Wave Inverter Remote GP-SWR-A

$31.99

-

Availability: Out of stock SKU: GP-SWR-A Categories: ,

Description

The Go Power Pure Sine Wave Inverter Remote GP-SWR-A works with all Go Power! ISW inverters, as well as the 1000, 2000, 3000, HS1500 watt pure sine wave inverters.

Product Overview
Model: GP-SWR-A

The new compact GP-SWR-A remote features an LED indicator showing inverter status, ON/OFF switch and 25′ of cable. This remote can be used with all GP-ISW inverters, the GP-HS1500, GP-SW1000, GP-SW-2000, and GP-SW3000 inverters. GP-SWR-A is compatible with both 12V & 24V inverters.

 

The SWR-A Remote allows the switching on and off of the inverter from a remote location. The remote displays the current status of the inverter through the following LED lighting patterns: Inverter is ON, Ignition Lockout is activated Reverse Over-Ride Function (ROF) is activated.

 

This is an ON/OFF remote control. The LED indicator light is located above the ON/OFF button. A steady flashing red LED light indicates that the Inverter is ON. A fast flashing red LED light specifies that the inverter is in Reverse Override Function selection status. A slow flashing red LED light indicates that the inverter is in Ignition Lockout Function selection status.

 

In some RV’s, a TV monitor is used in conjunction with a camera which allows the driver to view the area behind the vehicle while reversing. If the TV monitor is in view of the driver, it should remain off, and should only be turned on when the vehicle is reversing. When the gear is shifted to “reverse”, a micro-switch in the reversing mechanism of the vehicle generates a “+” battery voltage signal that can be used to switch on the TV monitor. This is termed as Reverse Override Function (ROF). If the TV monitor is powered from the inverter, “ROF” function will enable to switch on the inverter when the vehicle is reversed and the “+” battery voltage signal is fed to the remote.

Additional information

Weight1 lbs