Part Number: PWRUPS6000W
Truly the most unique product in our industry. It has a built-in 3 way automatic rapid transfer switch which selects the output power from shore/city, generator or inverter. Also includes a 30 Amp 3-stage battery charger and 6000 Watt modified sine wave inverter with PWM control which continually monitors and corrects the inverter's output. After wiring this unit you're done! It's all automatic.
Application:
Unit will automatically select and use power in the following order:
1. Shore or city power
2. Generator power
3. 12 Vdc or 24 Vdc Power (model specific). If #1 or #2 is being used, this unit will charge your external battery bank using state of the art 3 stage/30amp charging system. If #1 nor #2 is available, the built-in inverter will supply AC power.
Features
Automatic detection and selection of AC power
Detection of AC power sources
Overload shutdown
Output short circuit protection
Digital LED display
Main power lamp
Overload lamp
Power or run lamp
1 AC Outlet
1 Direct Connect Output
Temperature control fan
Input low voltage protection
Input high voltage protection
Reverse polarity protection
PWM - Pulse Width Modulation correction
Specifications
Continuous output power - 6000 Watts
Max Surge Power - 18,000 Watts
AC Output Voltage - 110 VAC
Transfer Time with Grid Loss - max .07ms
Charging Current (three stage) - 30 amps DC
DC Input Voltage - 10-15V
Efficiency - 86%
Output frequency - 60HZ
No load current main on - Shore power on 4.8 Watts, Shore power generator off 7.2 Watts
No load main power switch off - 1 Watt
No load protect switch off - 0 Watts
Dimensions - 35.8 L x 9 W x 5.1 H in inches
Weight - 23 lbs
