This inverter includes a 30 amp outlet on a built-in/on 13 foot cable. Perfect for inverters which are installed in hard to reach or secluded areas.

Part Number: BCT010009D

Features:

2500W max continuous power

Modified sine wave

Over Temperature protection

Over Load protection

Single 30 amp ac receptacle attached to a built-in 13 foot extension cord that can be used with a separate spliter if extra outlets are needed. Surge power strips not recommended

On/off switch

Convenient always on dual cooling fan operation

Internally fuse protected

ac output short circuit protection

Auto reset on most fault conditions

Heavy Duty battery terminals are designed to conduct more current therefore, requiring only one set of cables

Aluminum case for optimal cooling

Free 30 inch cables

Pre-slotted mounting plate

Instruction manual

Free 1 year tech support

1 Year Warranty Parts and Labor

Specifications:

Continuous output power: 2500 Watts. Use 200 amp inline fuse.

Surge power capability (peak power): 5000 Watts

dc input / operating voltage: 10 to 15 Volts

Output voltage: 120 Volts ac +/- 10%

Output wave form: modified sine wave with phase correction

Output frequency: 60 Hz +/- 1 Hz

Battery low voltage alarm: 10.5 +/- 0.5 Volts

Battery low voltage shutdown: 10.0 +/- 0.5 Volts

AC amps: 21

DC amps: 208

No load current: 2.5 Amps with switch in the on position (because fans are always on) See PWRINV2500 if you don't want always on fans. If the switch is in the off position it is < .1 amp

Full load efficiency: 90%

1/3 load efficiency: 95%

No load minimum operating temperature: -15 degrees Celsius

Full load maximum operating temperature: 55 +/- 5 degrees Celsius

AC Output Socket Type: dual Type 2 -3 prong

High input voltage protection: 15V-17V

Low input voltage shutdown: 10V

Internal fuse protection

Product size (L x W x H): 18.75”X 9.5”X 3.75”

Weight: 13.5 lbs