Part Number: PWRINV5K24W

The AIMS 5000 Watt 24 volt modified sine wave power inverter provides ample power to run all devices continuously which are rated at 5000 watts or less. With a peak of 10,000 watts, the 5,000 watt power inverter will fit many applications. This inverter comes a 1 year warranty and one full year of FREE tech support.

Free Shipping on all inverters rated 1000 Watts and above!

If you are new to power inverters, please refer to our FAQ or Estimated Watts pages. Feel free to call us with any questions at 866-419-2616.

AIMS Power Advantage:

New exclusive NEPT (New Equipment Protection Technology) design prevents excessive spikes from damaging your equipment.("soft" or "easy" start)

Modified Sine Wave Advantage:

More portable than pure sine wave inverters

Lighter weight

Lower cost

Informational:

Manufactured in ISO certified factory, since 1984

Tested EMC, LVD

100% factory line test and QC approval processes

Features:

5000 Watt max continuous power

Modified sine wave

Volt meter on front panel to monitor your battery voltage

Amp meter on front panel to monitor your Current use (rate at which battery is drained

Over Temperature LED indicator

Over Load LED indicator

AC Direct Connect Terminal

4 AC receptacles: Type 2 or 3 prong

On/Off Switch

Pre-wired for remote On/Off Switch

Over Temperature protection

Over Load protection

Single cooling fan

Internal fuse protection

AC output short circuit protection

Auto reset on most fault conditions

Aluminum case for optimal cooling

Pre-slotted mounting plate

Instruction manual

Free 1 year tech support

1 year warranty parts and labor

Specifications:

Continuous output power: 5000 Watts

Surge power capability (peak power): 10,000 Watts

DC input / operating voltage: 19 to 29 Volts

Output voltage: 120 Volts AC

AC Direct Connect Terminal

Output wave form: modified sine wave with phase correction

Output frequency: 60 Hz +/- 1 Hz

Battery low voltage alarm: 19 Volts

Battery low voltage shutdown: 19 Volts

No load current: < 0.6 Amps

Full load efficiency: 90%

1/3 load efficiency: 95%

No load min operating temperature: -15 degrees Celsius

Full load max operating temperature: 55 +/-5 degrees Celsius(automatic shutdown)

AC Output Socket Type: four Type 2-3 prong

High input voltage protection: 29V

Low input voltage shutdown: 19V

Internal fuse protection

Product size (L x W x H): 21" x 8" x 6.5"

***Cables: Must use two sets of 1 AWT or 1 set of 4 AWT. If you are using 1 set of 1 AWT, you must tie the two positive and two negative terminals together using our 6 inch jumpers.

Recommended Cables:

	1 AWT for cable runs of 10 ft & shorter
	4 AWT for cable runs of 10 ft & longer
	1 AWT Jumper